Home
Filling the THz Gap
Scientific Opportunities
Coherent Synchrotron Radiation
Calculated Flux
Brief Parameter List
Technical Specs:
Optical Functions & Beam Envelopes
Dipole Chamber
Vacuum Chamber
Mirror M1
Sector Layout
Magnet Specs
Power Supplies
RF System
Workshops
Reviews
Publications
IR Ring Team
ALS IR Home
ALS Home
LBNL Home
Privacy and Security Notice
MCMartin@lbl.gov
|
|
Magnets
Dipole Magnets:
| Quantity | Value |
|---|
| Number of Magnets | 12 |
| Nominal Field | 1.5 T |
| Maximum Field | 2.0 T |
| Bending Radius | 1.3354 m |
| Bending Angle | 30 deg |
| Gradient @ Nominal Field | - 2.8044 T/m |
| Hor. Good Field Region | +/- 2 cm |
| Ver. Good Field Region | +/- 2 cm |
| Field Quality (dB/B) | 0.05 % |
| Efficiency at Nominal Field | > 97 % |
| Efficiency at Maximum Field | > 73 % |
| Gap at beam trajectory (total) | 7.4 cm |
Quadrupole Magnets:
| Quantity | Value |
|---|
| Number of Magnets | 24 |
| Maximum Gradient | 15.6 T/m |
| Magnetic Length | 20 cm |
| Radius at the Pole Tip | 33 mm |
| Max Field @ Pole Tip | 0.50 T |
| Good Field Region Radius | 2 cm |
| Field Quality (dg/g) | 0.3 % |
Quadrupole-Octupole Magnets:
| Quantity | Value |
|---|
| Number of Magnets | 12 |
| Maximum Quad Gradient | 14.3 T/m |
| Magnetic Length | 20 cm |
| Radius at the Pole Tip | 33 mm |
| Good Field Region Radius | 2 cm |
| Field Quality (dg/g) | 0.3 % |
| Maximum (1/6 d3B/dx3) | 1250 T/m-3 |
| Total Field @ Pole Tip (max) | 0.46 + 0.04 = 0.5 T |
Quadrupole and Octupole windings must have independent
power supplies.
The ratio between quadrupolar and octupolar components
can change among different operation modes of the ring.
A solution with a completely independent octupolar magnet
separate from the quadrupole can be investigated as well.
In this case mechanical interferences with the other beamline
components must be carefully checked.
Sextupole Magnets:
| Quantity | Value |
|---|
| Number of Magnets | 30 |
| Maximum (1/2 d2B/dx2) | 390 T/m-2 |
| Magnetic Length | 15 cm |
| Radius at the Pole Tip | 33 mm |
| Max Field @ Pole Tip | 0.4 T |
| Good Field Region Radius | 2 cm |
| Field Quality (dg2/g2) | 0.5 % |
Correctors Magnets:
| Quantity | Value |
|---|
| Number of Hor. Magnets | 24 |
| Number of Vert. Magnets | 24 |
| Hor. Maximum Strength | 8 10-3 T m |
| Vert. Maximum Strength | 8 10-3 T m |
| Total Aperture | 66 mm |
The horizontal and vertical correctors can be assembled
together in a single hybrid element, in air or with a laminated iron body.
|
